Table of Contents
Advertisement
Products Manual
NRD-1300,1600
2-3. Explanation of Warning Labels
Risk of electric shock
High voltage flows in the electrical box.
If you get an electric shock, it may cause death or serious injury. Please make
sure to open/close the switch panel after cutting off the main power.
Injury by spindle/tools
As the sharp tool is rotating on the spindle at a high velocity, if you touch it
while wearing a glove during rotation, you may get an injury such as jamming in
the spindle or hand amputation. Please keep away from the spindle while it's
rotating. Also, do not touch the spindle with bare hands when stopped.
Scattering of chips
As there is a risk of injury from the scattering of chips and coolant on the eyes or
face during the process, please make sure to wear protective gear.
Gloves prohibited during work
If you wear gloves during work, the hands could be jammed in the gears of the
machine leading to serious disaster such as amputation.
Jamming in belt
As there is a risk of hands or fingers being jammed in the belt, please do not
operate when removing a safety cover. If a hand is jammed, please pull it out by
rotating to the opposite direction of the direction when the hand got jammed.
Full knowledge of product manual
When controlling the machine, please make sure to have full knowledge of the
product
accident/failure due to improper operation. Please immediately contact us for loss or
damage.
6
Nambuk Co., Ltd.
manual.
If
you
work
without
full
knowledge,
NB19-E01
it
may
cause
Advertisement
Table of Contents
