Nambuk NRD - 1300 Product Manual page 21

Products Manual
NRD-1300,1600
Daily Oil Supply Table
Sym
Oil Supply Parts
bol
A1 Spindle box
A2 Arm elevation box
A3 Spindle box left-hand side oil cup (2 sites)
A4 Weight arm upper part oil cup lower ball cap
A5 Spindle box clamp shaft and right-hand side ball cap
A6 Bracket oil cup for arm clamp
A7 Pinion gear bracket for column sleeve clamp
A8 Column sleeve clamp shaft upper bracket
A9 Hydraulic tank for tool ejection
A10 Left/right oil cups for spindle box clamp (2 sites)
B1 Column sleeve slideway face
B2 Arm slideway face
B3 Oil tank for arm elevation
C1 Arm elevation screw
C2 Rack slide part
C3 Rack shaft for spindle box clamp
C4 Column sleeve clamp shaft key way part
C5 Reduction box for clamp
D1 Coolant
* The oil supply periods were set taking into account the oil component on a basis of an 8-hour operation per
day. As each oil's life is affected by many factors such as change of viscosity resulting from the conditions
of use, environment (temperature, humidity, etc.), and oil deterioration, be sure to determine the exchange
period after checking the oil conditions.
capacity NRD-1300(25L), 1600(40L)
* COOLANT TANK
Oil Supply Sites Diagram
20 Nambuk Co., Ltd.
Amount Period
after first 3 months
about 2ℓ
exchange every
about 0.5ℓ
6 months
proper amt. once daily
proper amt. once a week
proper amt. once a week
proper amt. once a week
proper amt. once a week
proper amt. once a week
1.5ℓ once a year
proper amt. once a week
proper amt. once a week
proper amt. once a week
0.5ℓ frequent supply
proper amt. once a week
proper amt. once a week
proper amt. once a week
proper amt. once a week
proper amt. every 6 months
Cutting oil required for workpiece material
25/40ℓ
NB19-E01
Recommended Oil
Shell thllus S2 M32
NOTO H32
Shell omala S2 G68
Mobilgear 600xp 68
Hydraulic oil
Tellus S2 M32
NOTO H32
Slideway oil
Tona S2 M68
Vactra 2
Grease
Shell gadus S2 V220 2
Mobilux EP2