Helmet Holder; Rear Shock Absorber - Yamaha TW200M 1999 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
4
To install the seat, insert the pro-
jection on the front of the seat into
5
the holder and push down on the
seat, then tighten the bolts.
6
NOTE:
7
Make sure that the seat is securely
fitted.
8
9
2
1

1. Helmet holder

2. Open
Helmet holder
To open the helmet holder, insert
the key in the lock and turn it as
shown. To lock the helmet holder,
replace the holder in its original
position.
w
Never ride with a helmet in the
helmet holder. The helmet may hit
objects, causing loss of control
and possibly an accident.
3-10

Rear shock absorber

w
This shock absorber contains high-
ly pressurized nitrogen gas. Read
and understand
information before handling the
shock absorber. The manufacturer
cannot be held responsible for
property damage
EAU00260 injury that may
improper handling.
8 Do
not
attempt to open the cylinder
assembly.
8 Do not subject the shock
absorber to an open flame or
other high heat source. This
EW000030
may cause the unit to explode
due to excessive gas pressure.
8 Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
8 Take your shock absorber to a
Yamaha dealer for any service.
EAU01343
EAU00315
the following
or personal
result from
tamper with or