Yamaha TW200M 1999 Owner's Manual page 50

PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
1
1. Drain plug
4
3. Remove the drain plug and
drain bolt.
5
6
7
8
9
3
4 2
1. Drain plug
2. O-ring
3. Compression spring
4. Oil strainer
cC
When removing the oil drain plug,
the O-ring, compression spring,
and oil strainer will fall out. Take
care not to lose these parts.
NOTE:
The oil filter cover is secured by
two screws and a drain bolt.
Remove the drain bolt to drain the
filter cavity.
6-10
1
1
1. Filter cover screw (×2)
2. Drain bolt
4. Remove the filter cover screws
and the oil filter cover.
EC000070
5. Remove the oil filter element
and O-ring.
6. Clean the oil filter and strainer
with solvent. Replace if neces-
sary.
7. Check the O-rings. If damaged,
replace.
8. Install the drain plug, filter
cover, screws and drain bolt.
Tighten the drain plug to the
specified tightening torque.
2
3