Replacing The Fuses - Yamaha Road Star XV1600AT 2004 Owner's Manual

Replacing the fuses

1. Screw
The main fuse and the fuse box, which
contains the fuses for the individual cir-
cuits, are located behind panel A. (See
page 6-6.)
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU23524
1. Signaling system fuse
2. Ignition fuse
3. Headlight fuse
4. Carburetor heater fuse
5. Backup fuse (for odometer)
6. Spare fuse
1. Main fuse
2. Spare main fuse
CAUTION:
Do not use a fuse of a higher amper-
age rating than recommended to
avoid causing extensive damage to
the electrical system and possibly a
fire.
3. Turn the key to "ON" and turn on
4. If the fuse immediately blows
6-29
Specified fuses:
Main fuse:
30.0 A
Signaling system fuse:
10.0 A
Ignition fuse:
15.0 A
Headlight fuse:
15.0 A
Carburetor heater fuse:
10.0 A
Backup fuse:
5.0 A
the electrical circuit in question to
check if the device operates.
again, have a Yamaha dealer
check the electrical system.
ECA10640
6