WAREX VALVE GmbH
For single and double operated actuators
Standard manual override with detent
Compact design
High flow rate
Simple design of soft spool seal system
Maintenance-free
Easily interchangeable solenoid system
Exhaust air recirculation
The solenoids are ATEX approved
(see solenoids page 2)
Valves and solenoids are ATEX approved
Technical data
Medium:
Solenoid valve for filtered, lubricated *1)
or non-lubricated air
Operation:
Solenoid, indirectly controlled
Flow direction:
Fixed
Mounting position:
Optional, preferably with solenoid on top
Nominal size:
6
Port size:
G 1/4
Electrical connection:
See solenoid table
Operating pressure:
2 to 8 bar
Temperature:
-10 ... 50°C
Please consult our technical service for use below +2°C. If installed
in the open protect all connections against the penetration of moisture!
Materials:
Housing: Aluminium
Pilot flange: Plastic
Seat seal: NBR (Perbunan)
*1) Oil recommendation: Shell Hydrol DO 32, Esso Febis (as of July 1992) or comparable
oils with DVI values < 8 (DIN 53521) and ISO viscosity class 32-46 (DIN 51519).
9/05
Our policy is one of continued research and development. We therefore reserve
the right to amend, without notice, the specifications given in this document.
26230, 80107 NAMUR
3/2, 4/2 and 5/2 Directional control valves
Modular NAMUR design
Actuation: electromagnetic
Indirectly controlled spool valves
Ordering information
3/2 directional control valve, connection G 1/4,
solenoid 24 V DC, protection class IP65
Part No.: 8010777.3036.024.00
Connector: 0570275
Connections
See data sheet N/UK 7.7.002
3/2
2
12
1 3
5/2
2 4
14
12
315
Port size: G 1/4
3
10
4
2
14
12
5
1
3
N/UK 5.4.302.01