Disassembly - Vetter ManuTel SlimLine Operating Instructions Manual

Assembly and disassembly

Disassembly

Fig. 7: Closing the locking device
10.
11.
4.2 Disassembly
Personnel:
Protective equipment:
Carry out disassembly of the ManuTel
order:
1.
2.
3.
22
Fit the locking screw on the fork carriage again.
Lower the fork carriage to the base position.
n Driver of industrial trucks
n Protective work clothing
n Industrial helmet
n Protective gloves
n Safety shoes
®
Align the ManuTel SlimLine so that it is parallel with the ground.
Put the fork carriage in a vertical position and lift the ManuTel
the ground by raising the fork carriage until it is no longer in contact with the ground.
Secure the fork carriage against unintended lowering.
Remove the locking screw.
®
ManuTel telescopic fork arm Type SlimLine
® SlimLine from the fork carriage in the following
® SlimLine up from
V1.09/2019