Table of Contents
Advertisement
Safety
Dangers associated with handling the ManuTel® SlimLine
The ManuTel
truck is therefore subject to the legal requirements for occupational safety.
In particular, the following applies:
The operator must be aware of the applicable health and safety regulations and, in a
n
risk assessment, must determine any additional dangers that could arise from the
particular working conditions at the operation site of the ManuTel
must be outlined in the form of operating instructions for operation of the ManuTel
SlimLine.
n
The operator must ensure over the entire operating time that the operating instruc-
tions created by him/her correspond to the current state of the rules and regulations,
and adjust them if necessary.
n
The operator must clearly regulate and specify the responsibilities for assembly, ope-
ration, troubleshooting, maintenance and cleaning.
n
The operator must ensure that all persons that come into contact with the ManuTel
SlimLine have read and understood this manual. In addition, he/she must regularly
train personnel and inform them of any dangers.
n
The operator must provide personnel with the required protective equipment and
instruct them that wearing the required protective equipment is mandatory.
In addition, the operator is responsible for ensuring that the ManuTel
in a technically perfect condition. The following therefore applies:
n
The operator must ensure that the maintenance intervals described in this manual are
adhered to.
n
The operator must regularly have all safety equipment checked for functionality and
integrity.
2.5
Dangers associated with handling the ManuTel
General
requirement
for safety
10
®
SlimLine is used in the commercial sector. The operator of the industrial
WARNING!
Danger to life from obstructed view!
Persons and objects under or in front of the raised load may not be seen
under certain circumstances due to the field of vision being obstructed. If
people or objects in the danger zone are not detected, there is a risk of
serious accidents.
–
Always adhere to the general requirements for safety and due dili-
gence.
–
Ensure that there are no people or objects in the danger zone of the
industrial truck.
–
If the situation in the transport area is not visible, get out and carry
out a visual inspection or refer to someone who can guide and assist
you.
®
ManuTel
telescopic fork arm Type SlimLine
®
SlimLine. These
®
®
®
SlimLine is always
®
SlimLine
V1.09/2019
Advertisement
Table of Contents
