Seat Memory - Hongqi HS5 Manual

3.3. Adjusting the seat

Seat memory*

It can store the information of seats, steering wheel (for partial models), exterior mirrors and the key.
Seat memory setting
■ Initialization setting
Put the engine switch in "IG-ON" mode, and press keys 1 and 3 at the same time for initialization setting.
After the alarm speaker sounds once, the initialization is successful.
Seat greeting function
The greeting function consists of automatic back-off and return.
Automatic return: Turn off the engine switch and open the left front door. The seat and the steering wheel will
move backward automatically to the furthest position for the convenience of the driver.
Automatic return: after the engine is switched on, the seat and steering wheel automatically return to the
position before the automatic back-off.
96
Memory setting: after adjusting the position of the seat,
the steering wheel and the exterior rearview mirror,
press any memory key (for more than 3s (seconds)) for a
long time, release the key after hearing the instrument
prompt, and the position information and current key
information will be memorized in the key.
Call up the memory content: Press the memory button to
make the seats, the steering wheel and the exterior
mirrors automatically move to the stored positions in
this button.
Each key corresponds to three sets of memory positions.