Table of Contents
Advertisement
4.2. Driving Specifications
Turn signal lamp control handle
Turn signal lamps can be operated when
The engine switch is placed in "IG-ON" mode.
Turn signal light and danger warning light control
When the turn signal lamp is on, press the hazard warning lamp switch and the turn signal lamps on the left
and right sides will flash at the same time. Press the hazard warning lamp switch again to return to the
working state as the turn signal lamps.
When the hazard warning lights are on and the engine switch is placed in "IG-ON" mode, turn on the turn
signal lights, then the turn signal is working and the hazard warning light stops working. Turn off the turn
signal lights and return to the working status of the hazard warning lights.
Right turn signal lamp
Left turn signal lamp
Comfort flicker
When
the
control
handle
non-self-locking position once, the left/right turn signal
lights will blink three times; when the control handle is
continuously toggled to the non-self-locking position,
the left/right turn lights will continue flashing until the
control handle is released.
is
toggled
to
the
131
4
Advertisement
Table of Contents
