Operating Lights And Wipers; Intelligent High Beam Control (Ihc) System - Hongqi HS5 Manual

4.3. Operating lights and wipers

Intelligent high beam control (IHC) system*

IHC intelligent high-beam control function can help drivers to switch between high beam and low
beam automatically according to the surrounding road conditions. When the vehicle speed is greater
than 50km/h, the intelligent high-beam control is activated, and the intelligent high-beam indicator
of the combination instrument lights up; when the vehicle speed is less than 30km/h, the intelligent
high-beam control stands by and the intelligent high-beam indicator
IHC On and Off
It can be set to turn on and off the intelligent high beam system in the vehicle setting of the audio system
(See P.223)
Operating conditions of IHC
Start the engine, place the headlamp switch in the AUTO position, the high beam switch handle in the "high
beam off" position, and when the automatic light control is in the low beam on state, the intelligent high beam
control system is on.
Conditions under which the high beam is automatically turned on or off
● When all of the following conditions are met, the high beam will automatically turn on:
• The vehicle speed is higher than 50 km/h.
• The area in front of the vehicle is dark.
• There is a car in front without headlamps completely on or tail lamps completely on.
• Few street lamps are turned on ahead.
● When any one of the following conditions are met, the high beam will automatically turn off:
• The vehicle speed is lower than 30 km/h.
• The area in front of the vehicle is not dark.
• There is a vehicle in front with its tail lamps on or a vehicle on the other road side with its headlamp on.
• A number of street lamps are turned on ahead.
138
goes out.