Driver Status Monitoring (Dsm) - Hongqi HS5 Manual

4-5. Use other driving system

Driver Status Monitoring (DSM) *

The driver status monitoring system analyzes the vehicle motion in the lane, judges the driver status
(for example, tired) and releases warning according to the driver's status to remind the driver of
resting now.
The system shall be calibrated when changing the advanced driver assistance system camera unit,

front windshield or after four-wheel alignment. Otherwise, the system can not be used normally. Please
contact with China FAW authorized Hongqi distributors.
CAUTIONS
The driver status monitoring system is only a driving assistance system. It can only give an alarm

for the abnormal driving status of the driver and cannot directly interfere with the vehicle. The driver
must refer to the alarm, operate the steering wheel by himself to ensure the normal driving of the
vehicle.
Due to the road and environmental factors, the driver status monitoring system may not correctly

judge the abnormal driving status. The driver must observe the highway code and take a rest in time
according to the actual conditions to ensure the driving safety.
The driver status monitoring system without correct calibration may identify other lanes by

mistake, resulting in accidents.
184
After LDW/LKA lane keeping assist system is turned
on, the driver status monitoring system will be
automatically turned on.
After LDW/LKA lane keeping assist system is turned
Please have a rest!
off, the driver status monitoring system will be
automatically turned off.
If the system judges the current driving is abnormal, the
cluster gauge multi-function display zone will show the
early warning icon.
If the system judges the current driving is severely
abnormal, it will show the early warning icon and
release the warning tone.