Front Headlamp Switch - Hongqi HS5 Manual

4.3. Operating lights and wipers
Headlamp switch
Note: When the switch is in the AUTO position, if the headlamps, position lights and license plate lights are
off, the daytime running lights will be on.
Turning on the high beam
■
Daytime running lamp system
During daytime driving, to make it easier for other drivers to see your car, as long as the engine switch is
placed in "IG-ON" mode and the position lights is turned off, the daytime driving light will be automatically
turned on.
It can be set to turn on and off the daytime running lamp in the vehicle setting of the audio system.
(See P.223)
136
Front position lamp, rear position lamp, license
plate lamp and instrument panel backlights
illuminate.
Headlamps (dipped beam) and all the above
lamps illuminate.
Headlights (low beam), position lights, license
plate lights turn on and off automatically
Off.
When the headlamp (dipped beam) is turned on, push
the lamp control handle forward to turn on the high
beam; Pull the handle back to its original position to
turn off the high beam.
Pull backward the lamp control handle to turn on the
high beam; releasing the lamp control handle to turn off
the high beam.