Listening To Audio Playback By An External Device Through The Instrument's Speaker ([Aux In] Jack/Bluetooth/[Usb To Host] Terminal) - Yamaha PortableGrand DGX-670 Owner's Manual

Listening to Audio Playback by an External Device through the Instrument's
Speaker ([AUX IN] jack/Bluetooth/[USB TO HOST] terminal)
Audio playback by the connected device can be output from the instrument's speaker. To input audio,
connect an external device by one of the following methods.
• Connecting to the [AUX IN] jack by using an audio cable
• Connecting by Bluetooth (Bluetooth Audio function; page 96)
• Connecting to the [USB TO HOST] terminal by using a USB cable (USB Audio Interface function;
page 93)
When connecting to a smart device, you can also connect by using a USB wireless LAN adaptor (UD-
WL01; sold separately). For information about connection with a smart device, refer to page 94.
Audio Input Sound:
In this manual, "Audio Input Sound" refers to audio input to the instrument from the external devices connected by
these methods.
NOTE
• The volume of the Audio Input Sound can be adjusted from the external device.
• You can adjust the volume balance among the sounds of the instrument and the Audio Sound Input in the Mixer display (page 88).
• You can set whether Audio Input Sound from the external device is output to a computer or a smart device or not along with the
performance played on the instrument. For details, refer to page 93.
Connecting to an Audio Player by using an Audio Cable ([AUX IN] jack)
You can connect the headphone jack of an audio player such as a smartphone and portable audio player to
the instrument's [AUX IN] jack. Audio playback on the connected device is output from the built-in
speakers of this instrument.
NOTICE
To avoid damage to the devices, first turn on the power to the external device, and then to the instrument. When turning off the
power, first turn off the power to the instrument, and then to the external device.
NOTE
Use audio cables and adaptor plugs having no (zero) resistance.
Minimizing noise of the input sound via Noise Gate
By default, this instrument cuts unwanted noise from the input sound. However, this may result in wanted sounds
also being cut, such as the soft decay sound of a piano or acoustic guitar. To avoid this, set the Noise Gate to off via
[MENU] → Cursor buttons [
2 AUX In Noise Gate.
Instrument
Phone plug
(stereo mini)
Audio cable
Audio signal
][ ][L][R] Utility, [ENTER] → TAB [L] Config1 → Cursor buttons [
U D
Audio player
Headphone jack
Phone plug
(stereo mini)
DGX-670 Owner's Manual
9
][ ]
U D
95