Basic Operations; Display-Based Controls - Yamaha PortableGrand DGX-670 Owner's Manual

Basic Operations

Display-based Controls

The LCD provides comprehensive at-a-glance information on all current settings. The displayed menu or
parameters can be selected or changed by the controls around the LCD.
[1UD] – [8UD] buttons (page 20)
Cursor buttons [ ]
U
These buttons are used to move the on-screen cursor. In this manual, the upper and lower buttons are
described as [ U ] [ D ] and the left and right buttons as [L] [R]. There are two types of display. One is the
type in which the item is selected (and called up) only by moving the cursor, and the other is the type in
which you need to press the [ENTER] button after moving the cursor to actually call up the item.
 Example 1
 Example 2
][L][R] and [ENTER] button
[D
[EXIT] button
(page 21)
In the File Selection display (page 24),
use the Cursor buttons to select and
call up the file.
In the Menu display (page 100) and
other setting displays, use the Cursor
buttons to move the cursor, and then
press the [ENTER] button to actually
select the item.
TAB [L][R] buttons
(page 21)
Data dial (page 20)
Cursor buttons
[U][D][L][R] and
[ENTER] button (see
below)
DGX-670 Owner's Manual 19