Stitch - Planitar iGUIDE PLANIX Instruction Manual

Stitch

The post-processing in Stitch desktop software is explained in detail on goiguide.com/stitchtraining. Find
that page by going to Resources ➤ Technical Training ➤ iGUIDE Training 2 - Stitch Software.
Copy data to a computer
1. Eject the USB drive from the PLANIX.
2. Insert the USB drive into a computer.
3. Copy the project folder from the USB drive on to the computer.
4. Do not process data with Stitch directly from the USB drive to avoid data corruption.
Open data in Stitch
1. Open Stitch.
2. Click the Load project button and select the project folder.
3. Click Select and wait for the project to finish loading.
Edit data
1. Align laser measurement data.
2. Adjust images (optional).
3. Add notes (optional).
4. Rearrange and rename floors and scans in the folder tree (optional).
Export data from Stitch
1. Click the Export project button.
2. Set the initial pano of the iGUIDE if you haven't already.
3. One or more floors may have a problem. Read the list which appears and identify which items need to
be corrected or can be ignored.
4. Once all necessary items have been corrected, click Ignore.
5. Wait for the project to finish exporting.
6. Exit Stitch.
7. Inside the project folder, find and enter the new '_Export' folder.
8. Find the 'stitch.tar' file and upload it to the iGUIDE Portal for processing.
Setup ➤ Connect ➤ Survey ➤ Stitch 18