Adjusting The Parallel Guide; Hand Grip Position; Safety Lock Off Button - ALDI FERREX 704518 User Manual

D1

Adjusting the parallel guide

There is a cutting guide notch on the front of the base
plate (7) for use with the parallel guide (5) (Fig. E).
For straight cuts, use the 0º guide mark (16) to align
with your parallel guide scale.
For a 45º bevel cut, use the 45º guide mark (17) to
align with your parallel guide scale.
Securely clamp the parallel guide (5). Always make a
trial cut to check the setting.

Hand grip position

Always hold your saw firmly with both hands
when operating, with one hand controlling the
on/off trigger and the other hand on the front
handle for support and pressure. (Fig. F).

Safety Lock Off button

This circular saw has a lock off button to prevent
accidental starting. Depress lock off button (13)
then the on/off trigger (12) and then release the
lock off button (13). Your switch is now on. To
switch off just release the on/off trigger (12) (Fig. G).
The blade may continue to rotate after switching
off. Wait until the machine comes to a complete
stop before setting down.
AFTER SALES SUPPORT
1300 889 028
(toll free)
D2
MODEL No.: PSC1856.A • 02/2021 • 704518
1200W Circular Saw
D3
45 0
o
E
F
G
2
e-mail: info.aldi@positecgroup.com
o
1
14