ALDI FERREX 704518 User Manual

ALDI FERREX 704518 User Manual

900w
Hide thumbs Also See for FERREX 704518:

Advertisement

User Manual
704518
900W PLANER
Product
Info
Read all safety warnings and all instructions thoroughly before operating this product.
Ensure you keep your manual in a safe place for future reference.
IM ed 3; 02/2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FERREX 704518 and is the answer not in the manual?

Questions and answers

Summary of Contents for ALDI FERREX 704518

  • Page 1 User Manual 704518 900W PLANER Product Info Read all safety warnings and all instructions thoroughly before operating this product. Ensure you keep your manual in a safe place for future reference. IM ed 3; 02/2021...
  • Page 2 Try it out now Just scan the QR code with your smartphone and Product find out more about the Aldi product you have Info purchased*. * Depending on your tariff you may be charged for the connection.
  • Page 3 Warranty details REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION. The product is guaranteed to be free from defects in workmanship and parts for a period of 36 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion.
  • Page 4: Table Of Contents

    Contents Pack contents / parts Description of symbols General Safety Warnings Parts List Assembly and Adjusting Dust extraction port Dust extraction guide switch Baseplate stand Parallel guide Rebate guide Adjusting the cutting depth Operation On/off trigger Standard surface planing Planing with the parallel guide Edge chamfering Rebating Maintenance...
  • Page 5: Pack Contents / Parts

    Pack contents / parts Congratulations on the purchase of your FERREX® 900W Planer. When you open your packaging, first remove all items and check there are no parts damaged or missing. If you find anything wrong, do not operate the product until the parts have been replaced or the fault has been rectified.
  • Page 6: Description Of Symbols

    Description of symbols The instruction manual, rating plate, or on the product itself, may show these symbols. These represent important information about the product or instructions on its use. To reduce the risk of injury, user must read instruction manual Wear hearing protection.
  • Page 7: General Safety Warnings

    General safety warnings WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"...
  • Page 8 e) When operating a power tool outdoors, use an extension cord suitable Use of a cord suitable for outdoor use reduces the risk of for outdoor use. electric shock. f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.
  • Page 9 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off.
  • Page 10 Planer safety warnings 1. Wait for the cutter to stop before setting the tool down. An exposed rotating cutter may engage the surface leading to possible loss of control and serious injury. Note: The above warning applies only to planers without an automatic closing guard.
  • Page 11: Parts List

    8. Base plate 22. Baseplate stand (See Fig. C) 9. Parallel guide locking knob 23. V-groove (See Fig. J1) 10. Planing depth scale AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: PPL9001.A • 02/2021 • 704518...
  • Page 12 900W Planer 17 18 13 14 AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 MODEL No.: PPL9001.A • 02/2021 • 704518 (toll free)
  • Page 13: Assembly And Adjusting

    (not supplied), is best connected to a suitable external dust extraction machine, such as a workshop dust-extraction system or a household vacuum cleaner, for the efficient removal of dust and shavings. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: PPL9001.A • 02/2021 • 704518...
  • Page 14: Dust Extraction Guide Switch

    (7a), then insert the locking screw (7b) from below the parallel guide body (7a) into the end of the locking nut (7c). Firmly tighten the locking screw (7b) by turning it clockwise. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 MODEL No.: PPL9001.A • 02/2021 • 704518 (toll free)
  • Page 15: Rebate Guide

    (13) by turning it anti- clockwise, and slide the rebate guide (14) up and down to set the desired rebate depth by aligning AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: PPL9001.A • 02/2021 • 704518...
  • Page 16: Adjusting The Cutting Depth

    (2) then depress the on/off trigger (3). Then you can release the lock off AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 MODEL No.: PPL9001.A • 02/2021 • 704518...
  • Page 17: Standard Surface Planing

    82 mm wide. While using, the parallel guide (7) should be held firmly against the edge of the workpiece. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: PPL9001.A • 02/2021 • 704518...
  • Page 18: Edge Chamfering

    (14), and the number of passes made along the workpiece. Make sure that the planer is guided with a lateral supporting pressure. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 MODEL No.: PPL9001.A • 02/2021 • 704518 (toll free)
  • Page 19: Maintenance

    • Use only blades (20) designated for use with this model, as other blades (20) may cause vibration, decrease performance and may not clamp securely in the blade holder (18). AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: PPL9001.A • 02/2021 • 704518...
  • Page 20 (20) and the blade seat if dirty. Place the planer upside down on a flat surface. Slide the blade (20) into the blade holder (18) in AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 MODEL No.: PPL9001.A • 02/2021 • 704518 (toll free)
  • Page 21: Replacing A Drive Belt

    (c). Make sure the drive belt runs exactly along the length grooves of the small AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: PPL9001.A • 02/2021 • 704518...
  • Page 22: Correct Planer Blade Setting

    Cause: one or both blade edges fails to protrude enough in relation to rear base line. 4) Gouging at end Cause: one or both blade edges protrude too far in relation to rear base line. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 MODEL No.: PPL9001.A • 02/2021 • 704518 (toll free)
  • Page 23: Carbon Brushes

    Store the device and its accessories inside the carry case, and in a location that is protected from dust, moisture and direct sunlight and that is also out of the reach of unauthorised persons. AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: PPL9001.A • 02/2021 • 704518...
  • Page 24: Warranty

    Do not throw it in the trash or pour it into the earth. AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 MODEL No.: PPL9001.A • 02/2021 • 704518...
  • Page 25: What Your 3 Year Warranty Means

    Service Support If you have any issues with the operation of your product, please call us 1300 889 028 for advice, or email us at info.aldi@positecgroup.com. Accessories and After Sales Parts Accessories and after sales parts are available for purchase by visiting https://help.tools/ or calling our customer service hotline on: 1300 889 028...
  • Page 26: Troubleshooting

    For further inquiries or issues associated with your 900W Planer, call our Customer Service on 1300 889 028 or email us at info.aldi@positecgroup.com AFTER SALES SUPPORT e-mail: info.aldi@positecgroup.com 1300 889 028 MODEL No.: PPL9001.A • 02/2021 • 704518 (toll free)
  • Page 27: Technical Specifications

    Max rebate depth: 11mm Protection degree: Net weight: 3.25kg Product Dimensions: 300*165*175mm This product complies with: Safety: AS/NZS 62841.1 AS/NZS 62841.2.14 EMC: CISPR 14-1 AFTER SALES SUPPORT 1300 889 028 e-mail: info.aldi@positecgroup.com (toll free) MODEL No.: PPL9001.A • 02/2021 • 704518...
  • Page 28 If you are not entirely satis ed with this product, please return it to your nearest ALDI store, within 60 days from the date of purchase, for a full refund or replacement, or take advantage of our after sales support by calling the supplier’s Customer Service Hotline.

Table of Contents

Save PDF