Table of Contents
Advertisement
Gas Installation (GB & IE only)
This cooker uses NATURAL GAS only and cannot be used on any other gas without modification.
This appliance is manufactured for conversion to LPG if required. If the injectors are not supplied
they can be obtained from the After-Sales Service.
Installation and Service Regulations
This appliance must be installed and serviced only by a suitably qualified and registered
person, and in accordance with the current editions of the following standards and
regulations or other locally applicable regulations:
• Gas Safety (Installation and Use) Regulations
• Building Regulations
• British Standards
• Regulations for Electrical Installation
Failure to install the appliance correctly could invalidate any manufacturer's warranty and lead to prosecution under the
above-quoted regulation.
Gas Connection
The installation of the cooker to Natural Gas or LP Gas must be carried out by a qualified gas engineer. Installers shall
take due account of the provisions of the relevant British Standards Code of Practice, the Gas Safety Regulations and
the Building Standards (Scotland) (Consolidation) Regulations issued by the Scottish Development Department.
It is recommended that the gas connection to the cooker is installed with a flexible
connecting tube made to BS 5386.
Installation to Natural Gas
Installation to Natural Gas must conform to the Code of Practice, etc. The supply pressure for Natural Gas is 20 mbar.
https://producthelp.fisherpaykel.com/eu/Cook/Freestanding_Cookers/Dual_Fuel/OR120DDWGFX2/User_Guide_OR120DDW...
Updated: Fri, 15 Jan 2021 11:10:49 GMT
Powered by
7
Advertisement
Table of Contents
