Table of Contents
Advertisement
Operating manual
7
Commissioning
The Eyeleter is delivered in stable packing.
Keep the packing for possible return dispatch for reconditioning purposes.
8
How to operate
Do not operate the hand lever without first inserting a stack of paper. The stamp
can be damaged by multiple eyelets!
Figure A
BA_09/2018en
Put the Eyeleter in a stationary position on a stable
surface according to the purpose of use. Work surface,
desk, etc.
Insert the material to be eyeleted against the end stops [1]
through the lower stamp. Figure A.
Pull the hand lever [2] quickly forward.
The eyelets are inserted.
Let go of the hand lever [2].
Spring force will pull it back to its original position.
The eyeletting process is complete.
Depending on the eyelet size, use more or less force.
The favourable gear ratio allows even heavy eyelets to be
inserted easily.
2
Eyeleter 102-00
Advertisement
Table of Contents
