Operating manual
9
Setting the side stop
Figure B
10
Setting the rear stop
Figure C
11
Refilling with eyelets
Figure D
The Eyeleter is set up for a single eyelet size.
Always refill it only with the prescribed eyelets.
The wrong eyelets can cause malfunction or damage the device.
BA_09/2018en
Loosen the knurled screw [4] and set the distance by
sliding the side stop [5].
Then tighten the knurled screw [4].
Figure B.
Loosen the screw [6] and set the distance by sliding the
rear stop [7].
Then tighten the screw [6].
Figure C.
Fill the eyelet holder [8] about 2/3 with eyelets by
loosening the knurled screw [10] and turning the
cover [9] to the side.
Figure D.
3
Eyeleter 102-00