Radiant Assembly - Fisher & Paykel DCS BE1-48R Installation Manual/User Manual

Radiant Assembly

IMPORTANT!
Before assembling the radiant, check that the radiant trays have not moved during transit. They
should sit securely on their locating pins in the base of the grill.
1 Locate the radiant in the unit.
4 Place the 18 ceramic rods onto
the radiant.
If a ceramic rod breaks
1 Unlock radiant end cap by pushing it up with two fingers.
2 Replace broken ceramic rod.
3 Lock radiant end cap.
To order a replacement ceramic rod, please visit www.dcsappliances.com
INSTALLATION
2 Unpack ceramic rods and remove
radiant from the unit.
5 Lock radiant end cap.
3 Unlock radiant end cap by
pushing it up with two fingers.
6 Place the assembled radiant
into the unit.
EN
21