Radiant Assembly - Fisher & Paykel DCS BH1 Installation Manual/User Manual

Radiant Assembly

IMPORTANT!
Before assembling the radiant, check that the radiant trays have not moved during transit. They
should sit securely on their locating pins in the base of the grill.
1 Locate the radiant in the unit.
4 Place the 18 ceramic rods
onto the radiant.
If a ceramic rod breaks
1 Unlock radiant end cap by pushing it up with two fingers.
2 Replace broken ceramic rod.
3 Lock radiant end cap.
To order a replacement ceramic rod, please visit www.dcsappliances.com.
Note: for BH1-48RGI and BH1-36RGI models see the Quick Start Guide for information on installing
the griddle and Infrared Hybrid Burner.
INSTALLATION
2 Unpack ceramic rods and
remove radiant from the unit.
5 Lock radiant end cap.
3 Unlock radiant end cap
by pushing it up with two
fingers.
6 Place the assembled
radiant into the unit.
EN
19