Cleaning - VERSHOLD 200406-CWS Manual

• make sure that the batteries are not low
• check whether the same channel is set for the transmitter and
the receiver
• try setting the connection on channels 1, 2, or 3 in turn; wait at
least 1 minute until the devices are successfully connected.
• check the distance between the receiver and the transmitter –
this distance must not exceed 40 metres.
• make sure that nothing is interfering with transmitter/receiver
operation – do not place the devices next to a TV set, decoder,
router etc.
• wall thickness and material may affect the quality of the
connection between the devices – try relocating the transmitter
and check if the connection is restored.

8 Cleaning

8.1 Basic principles
Correct and regular cleaning will improve the safety and extend
the life span of the device.
Caution! Do not clean the device with any chemicals, alkali,
abrasive, or disinfecting agents, as they may damage the surface
of the device.
8.2 Cleaning the device
Always disconnect the device from the power source before
cleaning .
Clean the weather station (the receiver) with a dry, soft cloth.
Clean the transmitter with a slightly damp cloth and some mild
detergent . Wipe dry .
Caution! Do not clean the device with any strong chemicals,
44