VERSHOLD 200406-CWS Manual page 42

confirm. The year digits will start blinking.
5 . Set the year using the UP or DOWN button, press MODE to
confirm. The D and M letters in the date field will start blinking.
6 . Set the date format to D and M (day and month) or M and D
(month and day) by pressing UP or DOWN, press MODE to
confirm. Depending on the selection, the day or month digits
will start blinking.
7 . Set the month and day or day and month one after another by
pressing UP or DOWN, press MODE each time to confirm. The
day of the week language selection letters will start blinking in
the DAY field (the default setting is German GE).
8 . Set the displayed language of the days of the week by pressing
UP or DOWN, press MODE to confirm. The abbreviation for
the day of the week in the selected language will be displayed.
If no operation is performed within 30 seconds, the device will
automatically exit the settings.
7.7 Setting the alarm clock / alarm
1 . Press MODE shortly to switch the time display to the alarm
clock,
2 . Press and hold MODE for 2 seconds to start setting the alarm
clock. The bell icon will appear, and the hour digits will start
blinking.
3 . Set the hour using the UP or DOWN button, press MODE to
confirm. The minute digits will start blinking.
4 . Set the minutes using the UP or DOWN button, press MODE
to confirm.
5 . The alarm clock/alarm function will be activated.
6 . To turn off the alarm clock function / deactivate the alarm,
shortly press MODE to switch time display to alarm time
display, press UP or DOWN to disable / re-enable the alarm
function.
If no operation is performed within 30 seconds, the device will
42