Table of Contents
Advertisement
Performing a New Installation of the Cisco MGC Node Manager
CSCOcmnm Element Manager Versions
Note
Specific information displayed from running this script varies according to the cmnm release and patch
you are using.
Table 2-3
mgcEM
hostEM
Note
If you suspect problems in installation, check the installation log file (which by default is
/var/tmp/installCSCOcmnm.log) to determine specifics.
Verifying the Installation of CiscoView 5.4
Verify the installation of CiscoView 5.4 by entering the following command:
./cmnmupdateCVip -s
•
•
CiscoView is designed to work with CiscoWorks 2000. When installing CiscoView packages outside this
environment, certain functions are not supported. The following CiscoView buttons do not work in the
Cisco MGC Node Manager environment:
•
•
•
•
•
Installation Guide for the Cisco MGC Node Manager 2.5(2)
2-12
Patch Build
Name Version Level
------------------------------------
hostEMm
2.5
00
mgcEMm
2.5
00
------------------------------------
Element Managers
Common Element Manager for Cisco MGC node devices
Element Manager for Cisco MGC host signaling, trunking, and
dial plan components
If the package is installed, you see the following:
Current Ciscoview IP Address: 10.10.10.10
where 10.10.10.10 is the server IP address.
If the package is not installed, you see the following:
ERROR: information for "CSCOcmcv" was not found
Telnet
CCO connection
Preferences
About
Help
Build
Num
Type
071404 REL
071404 REL
Chapter 2
Installing Cisco MGC Node Manager
OL-4062-02
Advertisement
Table of Contents
