Setup Menu Tab; Units - Depth; Units - Temp (International Only) - Humminbird 931C Installation And Operation Manual

93x_Man_531370-1_A - vs4.qxd 2/18/2005

SETUP MENU TAB

From any view, press the MENU key twice to
access the tabbed Main Menu System, then press
the RIGHT cursor key until the Setup tab is
selected.
NOTE: Menu choices will vary depending on system
settings such as whether the unit is set for Advanced
User mode and what accessories are attached to the
control head.
Setup Menu
11:12 AM Page 75
depth-related readouts.
To change the Units - Depth setting:
1. Highlight Units - Depth on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Depth
setting. (Meters [International models only], Feet, Fathoms; Default is Meters
for International models, and Feet for Domestic models)
Units - Temp selects the units of measure for all temperature-related readouts.
International models only.
To change the Units - Temp setting:
1. Highlight Units - Temp on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Temp
setting. (Celsius, Fahrenheit; Default = Celsius)
70

UNITS - DEPTH

Units - Depth selects the units of measure for all
UNITS - TEMP
(International only)