Add A Waypoint Target Or Trolling Grid - Humminbird 931C Installation And Operation Manual

93x_Man_531370-1_A - vs4.qxd 2/18/2005

ADD A WAYPOINT TARGET OR TROLLING GRID

(937c DF Combo and 937c Combo models only)
Add or Remove a Waypoint Target: From the Waypoints submenu (accessed from the
Navigation main menu), select Target and press the RIGHT Cursor key to display a list
of waypoints. Select the waypoint you want to target. A target consisting of concentric
circles centered on the selected waypoint will appear on all of the navigation views;
the target shows various distance ranges from the targeted waypoint. To remove the
target, choose Remove Target from the Navigation X-Press™ Menu.
NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a target
or a grid to a new waypoint, the original waypoint will lose its target or grid.
Chart View with Target
1
1
Map Scale
2
Waypoint Target
3
11:12 AM Page 47
Add or Remove a Trolling Grid: From the Waypoints submenu (accessed from the
Navigation main menu), select Grid and press the RIGHT Cursor key to display a list of
waypoints. Select the waypoint to which you want to add the grid. The trolling grid will
appear on all of the navigation views, and can be used as a guide when trolling around
a waypoint. The grid can be rotated to any desired heading using Grid Rotation from
the Navigation Main menu. To remove the trolling grid, choose Remove Grid from the
Navigation X-Press™ Menu.
2
1 Map Scale
2 Waypoint Trolling Grid
3
NOTE: Only one waypoint can have either a target or a grid at one time. If you apply a target
or a grid to a new waypoint, the original waypoint will lose its target or grid.
4
NOTE: The spacing of the rings on the waypoint target and the spacing of the grid lines on
5
the trolling grid is the same as the length of the scale bar on the left edge of the display.
6
Zooming in or out will decrease or increase the spacing, respectively.
42
Chart View with Grid
2
1
4
5
6