Low Battery Alarm; Temp Alarm; Alarm Tone; Setup Menu Tab - Humminbird 585C Operation Manual

Hide thumbs Also See for 585C:

Operation manual (26 pages)

Table Of Contents

Table of Contents

FF585c_Man_English_531363-1_B.qxd

www.reelschematic.com

is equal to or less than the menu setting. The battery alarm will only sound for the

battery which is connected to the FishFinder. The Low Battery Alarm should be set to

warn you when the battery voltage drops below the safety margin that you have

determined. For instance, if you are running a trolling motor (battery operated), you

would want to set the Low Battery Alarm to sound before the battery voltage drops too

low for it to be used to start your main, gasoline-powered engine.

To change the Low Battery Alarm setting:

1. Highlight Low Battery Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Low Battery

Alarm setting. (Off, 8.5V - 13.5V, Default = Off)

detected by the FF585c reaches the Temp Alarm setting, which is either set in degrees

Fahrenheit or Celsius [International Models Only]. For example, if the Temp Alarm is set

to 58 degrees Fahrenheit, and the water temperature falls from 60 degrees to 58

degrees, the Temp Alarm will sound. Similarly, if the water temperature rises from 56

degrees to 58 degrees, the Temp Alarm will also sound.

To change the Temp Alarm setting:

1. Highlight Temp Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Temp Alarm

setting. (Off, 32-120 [Fahrenheit], 0-50 [Celsius [International Models Only]],

Default = Off)

tone will be produced as you adjust the Alarm Tone so that you can select the tone that

you can hear best.

To change the Alarm Tone setting:

1. Highlight Alarm Tone on the Alarms main menu.

2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Alarm Tone

setting. (High, Medium, Low, Default = Medium)

12/27/2004

8:33 PM