Advertisement
Drain hose
Drain hose
support (1)
joiner (1)
Phillips
Rubber washer for
5/8" (16mm)
inlet hose (1)
screws (9)
(comes already fitted)
Panel bracket (2)
& Knock-to-Pause Module (2)
(shipped fixed to product)
DishDrawer™ Installation Video
This video provides an overview of what is needed to install a DishDrawer™. It is intended as an overview only of the installation process and is not intended to be used
as a guide on how to install a DishDrawer™ yourself. https://vimeo.com/325297597
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 11' 10" (3.6m).
The kit is available from the nearest Fisher & Paykel Authorized Service Center, or Toll free 1.888.936.7872 or www.fisherpaykel.com
2
Wire clip (2)
(for securing
Drain hose joiner)
Moisture protection tape (1)
(to prevent moisture damage
to cabinetry)
Panel mounting
Toekick mounting bracket cutting template (1)
screws (12)
(To enable a custom toekick panel to be cut to
fit the product profile dependant on the depth
of the toekick)
PARTS SUPPLIED
Clamp (1)
(for securing
Drain hose joiner)
Hexagonal socket for
feet adjustment (2)
(long & short)
Toekick mounting bracket (1)
(A custom toekick panel of any material with
thickness 3/8" – 3/4" (9 – 19mm) can be screwed
to the Toekick mounting bracket)
Side mounting
Top mounting
bracket kit
brackets (2)
(A and B) (2)
OPTIONAL
OPTIONAL
Prefinished toekick (1)
Edge Protector (1)
(If the services hole is
through a metal partition,
the hole must be protected
with the Edge Protector
supplied to prevent damage
to the power cord or hoses.)
Toekick mounting
screws (5)
2
Advertisement
