Selecting The Speed Setting; Filling While In Use - Silvercrest SSML 1000 A1 Operating Instructions Manual

6) Place the filled and closed blender
use the recesses on the motor block
blender is pointing to the
clockwise to position
the blender

Selecting the speed setting

Once the blender
you can switch on the appliance. If the appliance is switched on the light element
on the top edge of the housing illuminates blue.
Set the switch
■ Level 1–3
for liquids or soft foodstuffs, for mixing, blending and stirring
■ Level 3–5
for more solid foods or for chopping
■ Level Ice Crush/Clean
for short, powerful impulse operation, e.g. for crushing ice cubes or when
cleaning. To prevent overloading the motor, the switch
position. Therefore, hold the switch
NOTE
► Fill the blender
Otherwise, the ice cubes will not be crushed optimally.

Filling while in use

WARNING!
► If you want to add additional foods during operation, use only the measuring
cap
► Do NOT open the lid
speeds!
► Do not insert cutlery items or mixing tools into the blender
appliance is in use. There is a considerable risk of injury if these come into
contact with the swiftly rotating cutting blades
To add more food while the appliance is in use, ...
1) Turn the measuring cap
2) Add the ingredients.
3) Afterwards, replace the measuring cap
by turning it clockwise.
■ 26 │ GB │ IE
symbol while doing so. Turn the blender
until it audibly engages. The motor cannot start until
is fitted flush.
is filled and sitting completely closed on the motor block
to...
with a maximum of 180 g of ice cubes.
provided for this purpose.
. Pieces of food could be thrown out at high
anticlockwise and remove it.
on the motor block
and ensure that the arrow
does not lock in this
in this position for short periods only.
!
into the lid opening and secure it
SSML 1000 A1
. To do this,
on the
,
while the