To Adjust The Airflow Rate; Airflow Direction - Daikin FTXP60N2V1B User Reference Manual

5 | Operation

5.4.1 To adjust the airflow rate

5.5 Airflow direction

User reference guide
20
INFORMATION
If the unit reaches the temperature setpoint:
▪
in cooling or automatic mode. Fan will stop operating.
▪
in heating mode. Fan will operate in low airflow rate.
1 Press to change the airflow setting as follows:
When. Adjust the airflow direction as desired.
What. The system directs the airflow differently, depending on the user selection
(swinging or fixed position). It does so by moving horizontal blades (flaps) or
vertical blades (louvers).
Setting
Vertical automatic swing
Horizontal automatic
swing
+ 3-D airflow direction
[—]
CAUTION
ALWAYS use the wireless remote control or other user interface (if applicable) to
adjust the position of the flaps and louvers. When the flaps and louvers are swinging
and you move them forcibly by hand, the mechanism will break.
The movable range of the flap varies according to the operation mode. The flap will
stop at the upper position when the airflow rate is changed to low during the up
and down swing setting.
a
b
c
a Flap range in cooling or drying operation
b Flap range in heating operation
c Flap range in fan only operation
Airflow direction
Moves up and down.
Moves from side to side.
Moves alternately up and down and from side
to side
Stays in a fixed position.
FTXP-N
Daikin room air conditioner
4P513685-11H – 2022.06