Error Code List - Pioneer MVH-08UBG/XEUW5 Service Manual

5

5.2 ERROR CODE LIST

Common
AMP ERROR
This unit fails to operate or the
speaker connection is incorrect.
The protective circuit is activated.
– Check the speaker connection.
– Check the power IC and its peripheral circuit.
USB device
NO AUDIO
There are no songs.
– Transfer the audio files to the USB
device and connect.
The connected USB device has
security enabled.
– Follow the USB device
instructions to disable the
security.
SKIPPED
The connected USB device contains
DRM protected files.
– The protected files are skipped.
PROTECT
All the files on the connected USB
device are embedded with DRM.
– Replace the USB device.
5
6
N/A USB
The connected USB device is not
supported by this unit.
– Disconnect your device and
replace it with a compatible USB
device.
CHECK USB
The USB connector or USB cable
has short-circuited.
– Check that the USB connector or
USB cable is not caught in
something or damaged.
The connected USB device
consumes more than maximum
allowable current.
– Disconnect the USB device and
do not use it. Turn the ignition
switch OFF and back to ACC or
ON. Connect only compliant USB
devices.
ERROR-19
Communication failed.
– Perform one of the following
operations, then return to the
USB source.
• Turn the ignition switch OFF and
back to ON.
• Disconnect the USB device.
• Change t
ERROR-23
USB device was not formatted
properly.
– Format the USB device with
FAT12, FAT16 or FAT32.
MVH-08UBG/XEUW5
6
7
7
8
A
B
C
D
E
F
9
8