Starting Up - Stairville Tri Flat PAR Profile 18x3W RGB 25 User Manual

5

Starting up

Connections in DMX mode
DMX indicator
Create all connections while the device is off. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
Connect the DMX input of the device to the DMX output of a DMX controller or another DMX
device. Connect the output of the first DMX device to the input of the second one, and so on
to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain
is terminated with a resistor (110 Ω, ¼ W).
If the unit is in DMX mode and a DMX controller is connected and turned on, the 'd' is flashing
in the first digit of the display.
Tri Flat PAR Profile 18x3W RGB 25°, 45°
LED PAR
Starting up
19