Stairville Tri Flat PAR Profile 18x3W RGB 25 User Manual page 30

Operating
Sound control
Constant colour
Tri Flat PAR Profile 18x3W RGB 25°, 45°
30
LED PAR
The sound controlled automatic show can only be activated when the unit is operating in
stand alone mode or as master in a master / slave combination. This setting is only relevant if
the device is not controlled via DMX.
Press [Mode] repeatedly until the display shows 'SOud' . This activates the sound controlled
automatic show.
Press [Setup] and use [Up] and [Down] to adjust the sensitivity for the sound control in a range
from 'SV.00' to 'SV.31' .
A constant colour can only be activated when the unit is operating in stand-alone mode or as
master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press [Mode] until the display shows 'Colr' . Press [Setup]. The display shows the setting for one
of the primary colours (display shows 'r.xxx' , 'G.xxx' or 'b.xxx' ). Press [Setup] to change the
colour.
Use [Up] and [Down] to adjust the intensity of the colour:
Display
'r.000' ... 'r.255'
'G.000' ... 'G.255'
'b.000' ... 'b.255'
Meaning
Red
Green
Blue