Table of Contents
Advertisement
Mounting options
Infrared sensor for the remote
control
You can install the unit in hanging or standing position. When in use, the device must always
be attached to a solid surface or an approved truss. Use the openings provided on the two-
piece bracket for attaching.
Always work from a stable platform whenever installing, moving or servicing the unit. In doing
so, the area underneath the unit must be cordoned off.
The safety cable must be attached to the bracket.
The infrared sensor for the signals of the remote control is located near the main LED on the
front panel of the device. Make sure it's not obstructed.
Tri Flat PAR Profile 18x3W RGB 25°, 45°
LED PAR
Installation
17
Advertisement
Table of Contents
