Switch Port Analyzer - Cisco Catalyst 2950 Software Manual

Default Settings
Table 4-2 Default Settings and Where To Change Them (continued)
Feature
Quality of Service (QoS)
Diagnostics
Displaying graphs and
statistics

Switch Port Analyzer

(SPAN) port monitoring
Console, buffer, and file
logging
Remote monitoring
(RMON)
System Messages
Security
Password
Addressing security
Trap manager
Community strings
Port security
Terminal Access Controller
Access Control System Plus
(TACACS+)
Protected port
Catalyst 2950 Desktop Switch Software Configuration Guide
4-10
Default
Setting Concepts and CLI Procedures
3
Disabled "Configuring Classification Using Port Trust
States" section on page
"Configuring a QoS Policy" section on
page 13-13.
"Configuring CoS Maps" section on
page 13-21.
Enabled –
Disabled "Configuring SPAN" section on page
Disabled –
Documentation set for Cisco IOS Release 12.1
on Cisco.com.
Disabled "SNMP Network Management Platforms"
section on page
Documentation set for Cisco IOS Release 12.1
on Cisco.com.
Appendix B, "System Messages."
None "Passwords" section on page 5-14
"Changing the Password" section on
page 6-10.
Disabled "Managing the MAC Address Tables" section
on page
0.0.0.0 "Adding Trap Managers" section on
page 6-12.
public "SNMP Community Strings" section on
page 5-14
section on page
Documentation set for Cisco IOS Release 12.1
on Cisco.com.
Disabled "Enabling Port Security" section on
page 10-6.
Disabled "Configuring TACACS+" section on
page 6-20.
Disabled "Configuring Protected Ports" section on
page 10-5.
13-10.
4-4.
6-15.
and "Entering Community Strings"
6-12.
Chapter 4 General Switch Administration
CMS Option
Device > QoS
Reports
10-22. Port > Switch Port Analyzer
(SPAN)
–
–
Report > System Messages
and –
Administration > MAC
Addresses
Administration > SNMP
Administration > SNMP
Port > Port Security
–
Port > Protected Port
78-11380-03