Cisco Catalyst 2950 Software Manual page 281

Chapter 11 Configuring IGMP Snooping and MVR
This example shows the results of the show mvr interface privileged EXEC command when the
member keyword is included:
Switch# show mvr interface gigabitethernet0/1 member
239.255.0.0
239.255.0.1
239.255.0.2
239.255.0.3
239.255.0.4
239.255.0.5
239.255.0.6
239.255.0.7
239.255.0.8
239.255.0.9
This example shows the results of the show mvr member privileged EXEC command:
Switch# show mvr member
MVR Group IP
------------
239.255.0.1
239.255.0.2
239.255.0.3
239.255.0.4
239.255.0.5
239.255.0.6
239.255.0.7
239.255.0.8
239.255.0.9
239.255.0.10
<output truncated>
239.255.0.255
239.255.1.0
78-11380-03
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
Status Members
------ -------
ACTIVE Gi0/1(d), Gi0/5(s)
INACTIVE None
INACTIVE None
INACTIVE None
INACTIVE None
INACTIVE None
INACTIVE None
INACTIVE None
INACTIVE None
INACTIVE None
INACTIVE None
INACTIVE None
Catalyst 2950 Desktop Switch Software Configuration Guide
Understanding Multicast VLAN Registration
11-15