Ieee 802.1Q Configuration Considerations; Trunks Interacting With Other Features - Cisco Catalyst 2950 Software Manual

Desktop switch software configuration guide
Hide thumbs Also See for Catalyst 2950:
Table of Contents

Advertisement

Chapter 8
Configuring VLANs
Table 8-7
Interface Modes (continued)
Mode
switchport mode trunk
switchport nonegotiate

IEEE 802.1Q Configuration Considerations

IEEE 802.1Q trunks impose these limitations on the trunking strategy for a network:
Note
The Catalyst 2950 switches do not support ISL trunking.

Trunks Interacting with Other Features

IEEE 802.1Q trunking interacts with other switch features as described in
Table 8-8
Switch Feature
Secure ports
Port grouping
78-11380-03
Function
Puts the interface into permanent trunking mode and negotiates to convert the link into a
trunk link. The interface becomes a trunk interface even if the neighboring interface is
not a trunk interface.
Puts the interface into permanent trunking mode but prevents the interface from
generating DTP frames. You must manually configure the neighboring interface as a
trunk interface to establish a trunk link.
Make sure the native VLAN for a 802.1Q trunk is the same on both ends of the trunk link. If the
native VLAN on one end of the trunk is different from the native VLAN on the other end,
spanning-tree loops might result.
Make sure your network is loop-free before disabling STP.
Trunks Interacting with Other Features
Trunk Port Interaction
A trunk port cannot be a secure port.
802.1Q trunks can be grouped into EtherChannel port groups, but all trunks in the
group must have the same configuration.
When a group is first created, all ports follow the parameters set for the first port
to be added to the group. If you change the configuration of one of these
parameters, the switch propagates the setting you entered to all ports in the group:
Allowed-VLAN list
STP path cost for each VLAN
STP port priority for each VLAN
STP Port Fast setting
Trunk status: if one port in a port group ceases to be a trunk, all port cease to
be trunks.
Catalyst 2950 Desktop Switch Software Configuration Guide
How VLAN Trunks Work
Table
8-8.
8-21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents