Assigning The Device To The Operating Buttons Of The Controller - Associate Function - fakro AMZ User Manual

Device programming
Assigning the device to the operating buttons of the controller –
ASSOCIATE function.
Please find below exemplary procedure of adding the device to the
operating buttons of the controller (ASSOCIATE FUNCTION):
In order to control the device (the awning blind):
1 . By pressing button choose one of four channels which will be used
for operating the blind and then...
Within 1 second press the sequence of buttons:
2. Press the In/Ex button momentarily and then...
3. Press one of the operating buttons
4. Readiness to assign the device is signalled by the controller –
- LEDs 1 ,2,3 light up for 1 0 sec.
5. Press the programming button on the awning blind for longer than 1
sec.
6. The controller signals
correct assigning – LEDs 2,3,4 light up for 2 sec.
Incorrect assigning – LEDs 1 ,2,3 blink three times
8/1 6
or or
2 3 4
1
IN/EX
x1
t<1sec.
x1
2 3
1
x1
2 3 4
2
1
3