Table of Contents
Advertisement
Important information
Read the instruction below carefully before proceeding to device usage in order to ensure
its proper functioning.
Please read carefully the instructions below before proceeding to the device installation
so as to prevent electric shock, injury etc.
When installing the electric awning blind it is necessary to observe the following
recommendations:
• After unpacking, check the awning blind elements for any signs of mechanical damage.
• Installation should be performed by a qualified person in accordance with manufacturer's
instructions.
• Plastic containers used for packing should be stored out of children reach as they may be a
potential source of danger.
• The awning blind should be used according to its intended design.
• The FAKRO Company shall not be responsible for any consequences being the result of
improper awning blind use.
• Any activities relating to cleaning, adjustment or dismantling should be preceded with
disconnecting the power supply.
• The awning blind cannot be washed using solvent-based substances or open stream of water
(do not immerse in water).
• Any repairs of the awning blind should be carried out by service authorised by the
manufacturer.
• The awning blind has been designed for installation outside the room.
• It is recommended to position remote control in the room in which the awning blind has been
installed. Spare parts are available in service of Fakro Company. When ordering it is necessary
to provide information from the data plate.
3/1 6
Advertisement
Table of Contents
