Change Of Sensitivity Level Of The Night Mode; Restoring Default Parameters - fakro AMZ User Manual

Mode of work and automatic control

Change of sensitivity level of the night mode

2 3 4
1
It is possible to choose between 4 sensitivity levels of the night 1
mode. No. 2 is default mode of the sensitivity level. In order to change 2
sensitivity level of the night mode it is necessary to press SELECT and
UP/DOWN buttons.
1 . Press and hold SELECT and then...
2
2. By pressing one of the operating buttons or or choose
requested value.
3. Release SELECT button.
t=5sec.
x1
1

Restoring default parameters

1 . Press and hold for 5 sec. programming button P on the awning blind
2
until single blink of motor status LED and then...
2. Not releasing P button press manual operating button for longer
3
than 1 sec.
3. Correct restoring of the default parameters – motor status LED
x5
blinks 5 times
1 4/1 6