Additional Functions; Checking Battery Charge Level; Checking Opening / Closing Status - fakro AMZ User Manual

Additional functions

Checking battery charge level

1 . Choose with the SELECT ( ) button appropriate channel on which
the awning blind is programmed, e.g. 1
2. Press the button ( ) and hold for 3 sec. until LED of the channel 1
starts blinking
3. Channel LED blinks for about 1 0 sec.
4. Press button ( ). Awaiting time for pressing ( ) is about 1 0 sec.
The inquiry concerning battery charge level is sent to the device. In
response the device receives message displayed with the use of the
controller's LEDs:
I – 1 (25% battery charge level),
II – 1 ,2 (50% battery charge level),
III – 1 ,2,3 – (75% battery charge level),
IV – 1 ,2,3,4 – (1 00% battery charge level)

Checking opening / closing status

1 . Choose with the SELECT ( ) button appropriate channel on which
the awning blind is programmed, e.g. 1
2. Press the button ( ) and hold for 3 sec. until LED of the channel 1
starts blinking.
3. Channel LED blinks for about 1 0 sec.
4. Press button ( ). Awaiting time for pressing ( ) is about 1 0 sec
The inquiry concerning battery opening / closing status is sent
to the device. In response the device receives message displayed
with the use of the controller's LEDs:
I – 1 (0% - the awning blinds completely closed)
II – 1 ,2,3,4 (1 00% - the awning blind completely open)
1
4
2
t=3sec.
I
1
III
2 3
1
1
t=3sec.
2
4
I
1
1
3
1
II
2
1
IV
2 3 4
1
1
3
1
II
2 3 4
1
1 5/1 6