Table of Contents
Advertisement
Chapter 3 Hardware and Software Installation
Chapter 3 Hardware and Software Installation
WLU11A is a Plug and Play device. You can plug into your USB port or remove it
without shutting down your computer.
3.1
WLU11A Hardware Installation
Before you start the hardware installation, you need to have the following items ready.
•
WLU11A unit
•
USB cable
•
Computer with USB port
To begin
1.
Power up your computer and login.
2.
Plug the smaller connector of the USB cable to WLU11A and the other end
the cable to your computer.
3.
The PWR LED will light up indicating that WLU11A is receiving power
from your computer.
4.
Your computer will detect the USB device and we can proceed with the
software installation next.
8
WLU11A Connections
Figure 3.1a
Advertisement
Table of Contents
Need help?
Do you have a question about the iWavePort WLU11A and is the answer not in the manual?