Switch Box Assembly - SAC TURBO-MAX 6190 Operator And Parts Manual

SWITCH BOX ASSEMBLY

11
22
NOTES:
1. REMOVE THE MOUNTING FEET FROM THE PUMP
CONTROL BOX BY REMOVING THE TOP
COVER TO ACCESS THE SCREWS FROM THE INSIDE.
2. WHILE THE COVER IS OPEN, FOLLOW THE INSTRUCTIONS FOUND ON PRINT MON900995
TO SET THE MIN/MAX OUTPUTS AND ALSO TO ADD THE JUMPER WIRE FOR THE CLEANOUT.
3. ADD A WIRE FROM THE SWITCHED SIDE OF THE AUGERS ON/OFF SWITCH WITH A RING
TERMINAL IN THE BOX AND A FEMALE SPADE CONNECTOR ON THE OUTSIDE OF THE BOX.
ROUTE THIS WIRE THROUGH THE SAME HOLE AS THE CURRENT CORD PASSES THROUGH.
(STRAIN RELIEF WILL NEED TO BE LOOSENED TO ALLOW WIRE TO PASS THROUGH). MAKE
THE SINGLE WIRE THE SAME LENGTH AS THE EXISTING CORDS.
4. REPLACE THE COVER.
5. USE SPMS10X1 SCREWS TO MOUNT THE CONTROL BOX TO THE MOUNTING BRACKET.
6. CONNECT HARNESS MON701640 TO THE SWITCHES, HOUR METER, AND PUMP
CONTROL BOX. THE SINGLE WIRE FROM THE PUMP CONTROL BOX WILL
CONNECT TO ONE TERMINAL OF THE HOUR METER.
7. CONNECT HARNESSES MON701576 AND MON701577 TO THE PUMP CONTROL
BOX AND ROUTE WITH HARNESS MON701640.
8. LEAVE DROP BOX PLUG LOOSE FOR CONNECTION DURING ASSEMBLY.
9. NOTE POSITIONS OF THE ROCKER SWITCHES AND ACTUATORS.
10. ENTRY POINT OF HARNESS IS THROUGH THE RECTANGULAR CUTOUT
IN THE FRONT OF THE BOX.
11. ROLL EXCESS LENGTH OF WIRE HARNESS UP AND ZIP TIE TO BOX.
ITEM # QTY PART #
1 4 BLT14X34ONC
2 1 DEC702
3 1 JES461065
4 1 MON104227
5 1 MON104230
6 1 MON701576
7 1 MON701577
8 1 MON701635
9 1 MON701640
10 1 MON800630
11 1 MON800631
12 1 MON900995
13 4 NUT1032LOCK
OPERATION
REPLACEMENT PARTS
MON901025 DUAL HYDO TURBO MAX SWITCH BOX ASSEMBLY
10
21
23 18
22
22
19
20
19
DESCRIPTION
1/4X3/4 SLOTTED TRUSS BOLT
TRUCK CONSOLE SWITCH BOX DECAL
#6 18-22 GA FORK TERMINAL
CONTROL BOX COVER
CONTROL CONSOLE MOUNT EC20100
TANDEM HYDRO WIRE HARNESS
EC20100 POWER WIRE HARNESS
CONSOLE SWITCH BOX WELDMENT
TANDEM HYDRO2 CONTROL HARNESS
GRAY ROCKER ACTUATOR
GRAY ROCKER SWITCH ACT , RED LGT
HYDRO DUAL ELECT CONTROL
10-32 LOCK NUT
12
2
4
ITEM # QTY
14
15
16
17
18
19
20
21
22
23
24
25
26
Page # 53
5
14 13
8
1
24
PART #
4 SPMB1032X12 10-32 X 1/2 MACHINE SCREW
4 SPMX10X1 #10 X 1 METAL SCREW
1 STI700279 #10 8GA TERMINAL RING
1 STI700291 18-22 GA FEMALE SPADE TERMINAL
1 STI701955 MINI HOUR METER
2 STI701956 END PANEL SWITCH MOUNT
3 STI701957 MID PANEL SWITCH MOUNT
1 STI701958 20A SPST ROCKER SWITCH BODY
1 STI701962 SWITCH BLANK PLUG
1 STI702759 SPST MOMENT ROCKER SWITCH BODY
4 STI703020 1/4-20 CLIP-ON NUT
24 STIWIRE14PR43 14GA RED / WHITE WIRE
7 STIWIRE18PR025 14GA YELLOW WIRE
READ complete manual CAREFULLY
BEFORE attempting operation.
15
DESCRIPTION