Control Console And Display - SAC TURBO-MAX 6190 Operator And Parts Manual

CONTROL CONSOLE AND DISPLAY

Located beside the truck driver's seat is the control console. The control console houses all of the main control
switches necessary to operate the machine. Most machine configurations have the following switches and arrange-
ments. Arrangements can vary according to chassis setups.
Control Switches
The master power switch supplies the electrical power to the auger and reel control box.
The auger power switch controls the electrical power to the auger speed control.
The reel power switch controls the electrical power to the reel speed control.
The auger and reel control knobs are connected directly to the hydrostatic pumps that drive their respective functions.
These are used to control the speed of the augers and the reel independantly.
The high speed cleanout button can be used to overide the speed settings of the augers and reel. When depressed it
will bring the augers and reel up to their maximum RPM. It will only overide the speed setting of either the augers or reel
if their power switches are turned on. It will not activate the augers or the reel if their power switch is turned off.
The auxiliary shift switch is used to change the gear range of the auxiliary transmission of the truck chassis
(If so equipped). To avoid loss of drive the shift switch should only be used when the vehicle is at a stand still
and the transmission is in the neutral psoition. Do not attemp to change the auxiliary transmission while in
motion.
The reversible radiator fan overide switch can be used at any time. The radiator fan is set to reverse itself
at a predetermined time interval to help eleviate excess dust and debris buildup on the radiator. This button
allows the operator to reverse the airflow on the radiator and should be used if there is a noticeable increase
of dust or debris on the radiator or if there is a spike in the engine water temperature.
The hour meter registers how many hours the mixer is in operation.
The bunk light switch is an on-off switch that controls the flip chute and rear bumper lights.
OPERATION
REPLACEMENT PARTS
READ complete manual CAREFULLY
Page # 22
BEFORE attempting operation.
Scale Head
Fuse/Relay Box