Getting Started; Unpacking; Hookup Overview - Sony TA-VE800G Operating Instructions Manual

Getting Started

Unpacking

Check that you received the following items with the
amplifier:
• Remote commander RM-VR1 (remote) (1)
• Size AA (R6) batteries (2)
• IR repeater (1)
• Video cable (1)
• Getting Started and Basic Operation Guide (1)

Hookup Overview

The amplifier allows you to connect and control the
following audio/video components. Follow the
hookup procedures for the components that you want
to connect to the amplifier on the pages specified. To
learn the locations and names of each jack, see "Rear
Panel Descriptions" on page 41.
TV/VCR Hookups (10)
Speaker
Monitor
System
Hookups (9)
Satellite decoder
Front
VCR
speaker
(L)
LD player
Centre
CD player
speaker
Rear Tape deck
speaker
(L) DAT/MD deck
Turntable
Audio Component
Hookups (8)
Before you get started
• Turn off the power to all components before making
any connections.
• Do not connect the mains leads until all of the
connections are completed.
• Be sure to make connections firmly to avoid hum
and noise.
• When connecting an audio/video cable, be sure to
match the colour-coded pins to the appropriate jacks
on the components: Yellow (video) to Yellow; White
(left, audio) to White; and Red (right, audio) to Red.
Getting Started
IR Repeater
Hookups (8)
Front
speaker
(R)
Active
woofer
Rear
speaker
(R)
Video camera/
Video game
TV/VCR
Hookups (10)
7 GB