Getting Started; Unpacking; Hookup Overview - Sony TA-AV661 Operating Instructions Manual

o
Started Getting
Unpacking Hookup Overview
Check that vou received the following items with the The amplitier allows:you ta connect and control the
amplitier: following audio/video components. Follow the
¢ Remote controller (remote) (1) hookup procedures on the specitied pages for the
« Size AA (R6) batteries (2) components that you want to connect to the amplitier.
To learn the locations and names of each jacks, see
"Rear Panel Descriptions" on page 22.
Inserting batteries into the remote Video Component
: Speaker Hookups (7)
Insert two size AA (R6) batteries in accordance with System
the + and - marking on the battery compartment. Monitor
When using the remote, point it at the remote sensor &
on the amplifier.
e When to replace batteries
Under normal use, the batteries should last for about 6 L F
months. When the remote no longer operates the ed Tuner
om eis Component
amplifier, replace both batteries with new ones. Hookups (7)
: = Turntable
Notes
** Do nof use a new battery with an old one.
* Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
Before you get started
* [f you don't use the remote for an extended period of time.
. . : : ° wi ypone efore maki
remove the batteries to avoid possible damage from Turiof ithe power te.allicompenents before ng
any connections.
Do not connect the AC power cords until all of the
connections are completed.
Be sure to make connections firmly to avoid hum
and noise.
When connecting an audio/video cable, be sure to
match the color-coded pins to the appropriate jacks
on the components: Yellow (video) to Yellow; White
(left, audio) to White; and Red (right, audio) to Red.
battery leakage and corrosion.