Ir Repeater Hookups; Audio Component Hookups - Sony TA-VE800G Operating Instructions Manual

Getting Started

IR Repeater Hookups

Overview
This section describes how to connect the supplied
extra infrared (IR) repeater to the amplifier. The
repeater emits infrared signals corresponding to those
emitted by the remote controls supplied with the
respective components. Connected this repeater to
obtain additional coverage if you experience difficulty
controlling a certain component using the amplifier's
on screen display (OSD) control functions, or your
installation prevents the repeater on the front panel
from reaching all of the equipment you need to control.
For the specific location of the terminal, see the
illustration below.
IR OUT
Hookups
Amplifier
IR OUT
Notes
• Use the supplied adhesive tape to secure the IR repeater
so that its front faces the equipment to be controlled.
• If you experience trouble controlling the connected
equipment, the infrared (IR) signals transmitted from the
repeater may not be reaching the infrared receptor on the
respective equipment. In such a case, reposition the IR
repeater closer to that piece of equipment.
8 GB

Audio Component Hookups

Overview
This section describes how to connect your audio
components to the amplifier.
For specific locations of the jacks, see the illustration
below.
CTRL A1
PHONO
What cords will I need?
Audio cords (not supplied) (1 for each CD player and
turntable; 2 for each tape deck, DAT deck, or MD deck)
Hookups
IR repeater
The arrow ç indicates signal flow.
CD player
Tape deck
DAT/MD
TAPE
TUNER CD DAT/MD
White (L)
Red (R)
Amplifier CD player
L
R
IN
CD
Amplifier Tape deck
L
R
REC OUT IN
TAPE
Amplifier
L
R
REC OUT IN
DAT/MD
White (L)
Red (R)
OUTPUT
LINE
L
R
OUTPUT INPUT
LINE LINE
L
R
DAT/MD
OUTPUT INPUT
LINE LINE
L
R