Advertisement
ST600-900S
NOTE: It is possible to make approximate basic settings on a flat, solid floor, but you can only perform final
checks of your settings when sowing in the field!
1. Set the frame to the horizontal
With the tractor connected, the seed drill frame must be absolutely horizontal with the ground.
•
If this is not the case, adjust the top rod of the draw bar to bring the machine parallel with the
ground.
2. Radar
The upper edge of the radar securing must be parallel with the ground and
therefore parallel with the frame.
The radar can be re-calibrated if you believe that the speed or area measure-
ment are not correct. Refer to the instruction manual for how to do this.
4
Settings
Frame parallel
with the ground
Upper edge of
the securing is
parallel with the
frame.
01.03.2017
Advertisement
